
Model Number |
CBD0012 |
Power Supply |
230/415 v, 50Hz |
Power Input |
2 kw |
Dimension(L*W*H) |
1380X860X1340 MM |
MOQ |
As per requirements |
Place of Origin |
Pune , Maharashtra India |
Lead Time |
3 – 4 weeks |
Warranty |
1 year warranty |
DryBox 2000 Watt Food Dehydrator CBD0012: Your Premier Drying Solution with Strong Airflow Design With its Strong airflow design, the CBD0012 ensures a consistently even drying process, whether you’re drying fruits, vegetables, spices, Herbs, Pharmaceutical products, Ready to eat or Ready to cook products or meats. It’s the top choice for achieving optimal dehydration results. This model is compatible with 12 Stainless steel 304 trays.
As with all CBD0012 series food dehydrators, the CBD0012 is CE-certified, ISO & GMP Certified guaranteeing both quality and safety in your dehydration endeavors.
- CBD0012 is a Plug & Play model as it doesn’t need any installation on site. This model is available in single phase & three phase supply also.
- Tray size for CBD0012 is 16x32x1inch in Stainless steel 304.
- Whole machine is provided on sturdy wheels so you can easily relocate and move the
- We can supply this machine in MS POWDER COATED, SS 304/ 316 & COMBO OF Powder coating & SS 304/ 316 material of construction (MOC) as per customer requirement.
- You can easily load 18 – 25 Kg input product in CBD0012
SPECIFICATIONS FOR CBD0012
Product Capacity (Kg) Based On Cut Fruits |
25 kg/Batch |
Dehumidification Capacity (Ltr/Hr) |
1.5 to 2 |
Drying Time (Hrs) |
Depends on product moisture % & surface area. |
Heating Capacity (KW) |
4.5 |
Connected Power (KW) |
2.3 |
Normal Power Consumption |
1 to 1.5 KWh |
Power Supply (A.C, Hz) |
415V,3Ph,50hz |
Working Temperature |
45 to 65˚C (Drying) |
Noise Level |
≤ 60 DB |
Controller |
DryBox Make PLC Based Smart Controller |
Net Weight (Kg) Approx. |
280 |
Gross Weight (Kg) Approx. |
420 |
External Dimension of Machine LxWxH |
54.4”x34”x52.8” Inch Door Clear opening should be W 36 x H 54 Inch |
KEY SPECIFICATIONS
- Close loop Technology gives clean and hygienic drying Retention of Color, Aroma, taste and nutrition values.
- Excellent Re-hydration Properties.
- Low temperature and controlled humidity drying.
- PLC based fully automatic HMI System & Time based Drying
- Performance Independent of weather and geographical Locations.
- Power Saving up to 60%
WORKING PRINCIPLE
We have developed more advanced closed-loop dehumidification heat pump drying technology that offers a better drying quality and effect and more significant power-saving.
The DRYBOX closed-loop dehumidification heat pump dryer is built into the sealed and heat-preserved drying house. from whose bottom the air is released and is returned to the upper part. The air then runs through the cold coil (heat Exchanger) to get cooler. The moisture in the air will be condensed into drops of water and collected in the Drain tray below and discharged from the house through a water pipe.
After dehumidification, the air will run through the Hot coil (Heat Exchanger) turn to the dry and hot air and penetrate through the product heating it up. This will release water from the material which evaporates into the humid hot air and then is taken back into the dryer again. Eventually, the steam will be condensed onto the cold coil (heat Exchanger) and then discharged out of the drying house. The whole process will begin again and will repeat until the material is thoroughly dried. In the above process heat energy is circulated within the drying house taken in by cold coil (heat Exchanger) and released out from Hot coil (Heat Exchanger) without any loss of heat. Therefore it is highly efficient and completely immune from the impact of external temperature and humidity. The unique and creative design of the DryBox closed-loop dehumidification heat pump dryer has completely solved all of the problems associated with the traditional open-loop dryers.



