TUNNEL TYPE DRYER TND0144

Technical Data Sheet For Model – TND0144

Product Capacity (Kg) Based

on cut fruits

300 kg/Batch

Dehumidification Capacity

(Ltr/Hr)

16-18

Drying Time (Hrs)

Depends on product moisture % &

surface area.

Heating Capacity (KW)

14.0

Connected Power (KW)

10

Normal Power Consumption

7 to 8 KWh

Power Supply (A.C,Hz)

3 Phz,400 V

Working Temperature

45 to 65˚C (Drying)

Noise Level

≤ 80 DB

Controller

Agro Ripe Make

Smart Controller

Net Weight (Kg) Approx.

1000

Gross Weight (Kg) Approx.

950

Machine Running Time/Day

Max.19-20 Hrs

Actual Space Required For Installation

5500x2000x2200m

m LxWxH

 

We have developed more advanced closed-loop dehumidification heat pump drying technology that offers a better drying quality and effect and more significant power-saving. 

The DRYBOX closed-loop dehumidification heat pump dryer is built into the sealed and heat-preserved drying house. from whose bottom the air is released and is returned to the upper part. The air then runs through the cold coil (heat Exchanger) to get cooler. The moisture in the air will be condensed into drops of water and collected in the Drain tray below and discharged from the house through a water pipe. 

After dehumidification, the air will run through the Hot coil (Heat Exchanger) turn to the dry and hot air and penetrate through the product heating it up. This will release water from the material which evaporates into the humid hot air and then is taken back into the dryer again. Eventually, the steam will be condensed onto the cold coil (heat Exchanger) and then discharged out of the drying house. The whole process will begin again and will repeat until the material is thoroughly dried. In the above process heat energy is circulated within the drying house taken in by cold coil (heat Exchanger) and released out from Hot coil (Heat Exchanger) without any loss of heat. Therefore it is highly efficient and completely immune from the impact of external temperature and humidity. The unique and creative design of the DryBox closed-loop dehumidification heat pump dryer has completely solved all of the problems associated with the traditional open-loop dryers. 

SPECIFICATIONS FOR TND00144

 

Technical Data Sheet For Model – TND0144

Product Capacity (Kg) Based

on cut fruits

300 kg/Batch

Dehumidification Capacity

(Ltr/Hr)

16-18

Drying Time (Hrs)

Depends on product moisture % &

surface area.

Heating Capacity (KW)

14.0

Connected Power (KW)

10

Normal Power Consumption

7 to 8 KWh

Power Supply (A.C,Hz)

3 Phz,400 V

Working Temperature

45 to 65˚C (Drying)

Noise Level

≤ 80 DB

Controller

Agro Ripe Make

Smart Controller

Net Weight (Kg) Approx.

1000

Gross Weight (Kg) Approx.

950

Machine Running Time/Day

Max.19-20 Hrs

Actual Space Required For Installation

5500x2000x2200m

m LxWxH

KEY FEATURES OF HEAT PUMP DRYER TND0144

 

  • Close loop Technology gives clean and hygienic drying Retention of Color, Aroma, taste and nutrition values.
  • Excellent Rehydration Properties.
  • Low temperature and controlled humidity drying.
  • PLC based fully automatic HMI System & Time based Drying Possible.
  • Performance Independent of weather and geographical Locations. 
  • Power  Saving up to 60%

 

WORKING PRINCIPLE OF DRYBOX HEAT PUMP DRYER

 

We have developed more advanced closed-loop dehumidification heat pump drying technology that offers a better drying quality and effect and more significant power-saving. 

 

The DRYBOX closed-loop dehumidification heat pump dryer is built into the sealed and heat-preserved drying house. from whose bottom the air is released and is returned to the upper part. The air then runs through the cold coil (heat Exchanger) to get cooler. The moisture in the air will be condensed into drops of water and collected in the Drain tray below and discharged from the house through a water pipe. 

After dehumidification, the air will run through the Hot coil (Heat Exchanger) turn to the dry and hot air and penetrate through the product heating it up. This will release water from the material which evaporates into the humid hot air and then is taken back into the dryer again. Eventually, the steam will be condensed onto the cold coil (heat Exchanger) and then discharged out of the drying house. The whole process will begin again and will repeat until the material is thoroughly dried. In the above process heat energy is circulated within the drying house taken in by cold coil (heat Exchanger) and released out from Hot coil (Heat Exchanger) without any loss of heat. Therefore it is highly efficient and completely immune from the impact of external temperature and humidity. The unique and creative design of the DryBox closed-loop dehumidification heat pump dryer has completely solved all of the problems associated with the traditional open-loop dryers. 

 

Details of Drying Chamber:

 

  1. Material: 60mm Polyurethane puff panels (material SS + powder coated or both side ss304)
  2. Size of TND0096 drying room:  (L*W*H) 3600 mm×2046 mm×2200mm
  3. Door Size (W*H): 1100*1900mm.
  4. Maintenance window is also provided
  5. Floor Insulation option is also available.

 

Details of Trolley (6 Trolley)

  1. Material: Stainless Steel 304
  2. Size of the Trolley (L*W*H):880*450*1650 mm
  3. There are 24 trays/ trolley; distance in between the tray is 60mm, 
  4. Comes with SS bracket sturdy wheels with and without brakes.
  5. Provided Stoppers from both side to lock the trays in trolley. 

 

Detail for Trays (144 tray)

  1. Material: stainless Steel 304
  2. Size: 810 X 410X 25mm (L*W*H):
  3. Plain & Perforated trays available as per product requirements.